Thanks for registering your P127!

Now that you have registered your kayak, let us help you create the best experience on the water

Accessories

Access Plate Accessory Package

Installed on both the SS Series and RS117 fishing kayaks the stern Access Plate allows for easy access when you need to get inside the hull of your kayak to do an install. Common times this comes in handy include installing a rudder, electronic motor, anchor trolley, or a Power-Pole Micro Anchor. Included with this kit are one access plate and four 10/32 stainless screws. Made in the USA.
$19.99

Bonafide Fin Dome Tag Accessory Package

By popular demand, the fin icon dome decal is now available for purchase! This decal is featured on each of our kayaks, and is the perfect way to show that you're a part of the Bonafide family.
$2.99

Bonafide Karbonate Board

Bonafide Branded
KBF Approved
High color yellow that’s easy to read and extremely durable.
Built in Cradle
$43.99

Bonafide Kayak Covers

Bonafide Kayak Covers are custom made to fit our kayaks just right. Each cover includes a full set of cover tie down straps (one for each loop set - 5 or 6) that can be used to secure the cover when traveling through the sewn in loops on the cover. All covers are made in USA and created with marine-grade anti-wick thread that includes double-stitched construction and 4-ply join seams.

$184.99

Bonafide Ketch X Board

Bonafide Branded
Tether holes CNC machined on fence end of the board.
High color contrast that’s easy to read and extremely durable.
Tournament numbers on top of Kradle edge
Ketch Kradle incorporated into board (all one piece)
Widened fence
$69.99

Garmin ECHOMAP UHD 73sv, US w/GT56

Take fishing to the next level.

SONAR SUPPORT

This chartplotter supports a variety of Garmin transducers (sold separately), including the Panoptix LiveScope™ scanning sonar system, which lets you see all around your boat in real time.

VIVID COLOR PALETTES

High-contrast vivid scanning sonar color palettes make it easier than ever to distinguish targets and structure.

OPTIONAL TRANSDUCER BUNDLE

Select the transducer bundle to add a GT56 transducer for Garmin CHIRP traditional sonar and Ultra High-Definition ClearVü and SideVü scanning sonars. With three scanning sonar frequencies and 20% greater range for our UHD SideVü sonar, you’ll get top performance at all depths.

PRELOADED MAPPING

Experience unparalleled coverage and detail with preloaded LakeVü g3 inland maps featuring integrated Navionics® data. Maps cover more than 18,000 lakes with up to 1’ contours.

QUICKDRAW CONTOURS

Create personalized fishing maps on-screen with 1’ contours. Keep the data to yourself, or share it with the Quickdraw Community on the Garmin Connect™ app3.


 


Boat connected.

NETWORK CAPABLE

If you have multiple compatible ECHOMAP UHD or ECHOMAP Ultra devices on your boat, the 7” and 9” models can share information — such as sonar, user data and charts — with them.

NMEA 2000® AND NMEA 0183 NETWORKS

Connect to your compatible autopilots, digital switching, weather, Fusion-Link audio system, media, VHF, AIS, engine data, heading sensors — such as the SteadyCast sensor — and more from one screen.

ACTIVECAPTAIN® APP

Built-in Wi-Fi® connectivity pairs with the free all-in-one mobile app for access to the OneChart™ feature, smart notifications, software updates, Garmin Quickdraw™ Community data and more1.

FORCE™ TROLLING MOTOR COMPATIBILITY

Take control of the most powerful and efficient trolling motor available2, route it to waypoints, follow tracks and more from the screen of your chartplotter.

ENGINE CONNECTIVITY

Connect this chartplotter to different kinds of engines — including select Mercury and Yamaha® models — to see RPMs, fuel flow, temperature, trim and other important information at a glance. You may need additional hardware, so be sure to check with your engine manufacturer.


 SPECIFICATIONS

Physical & Performance

Display size 6.1" x 3.4"; 7.0" diagonal (15.5 x 8.6 cm; 17.8 cm diagonal)
Display resolution 400 x 800 pixels
Physical dimensions 9.8" x 5.5" x 2.0" (25 x 13.9 x 5.1 cm)
Receiver

5 Hz

Water rating

IPX7

Weight

1.7 lbs.(0.77kg)

Mounting options Bail or flush
Display type WVGA display
Antenna Internal or external over NMEA 2000

Maps & Navigation

Preloaded maps

LakeVü g3 (inland maps)

Accepts data cards

1 microSD™ card; 32 GB maximum size

Routes 100
Track log 50,000 points; 50 saved tracks

Features

ClearVü

Yes with CHIRP (built-in)

Waypoints

5,000

Transmit power 500 W (RMS) / 4,000 W (peak to peak)
NMEA 0183 compatible Yes
Dual-beam (77/200 kHz) sonar capable Yes
Supports DSC (displays position data from DSC-capable VHF radio) Yes
NMEA 2000® compatible Yes
ActiveCaptain compatible Yes
Sonar recording Yes
Garmin Marine Network™ ports

1 Panoptix™ port

Garmin Sonar compatible Yes
GSD™ Black Box sonar support No
Sonar history rewind Yes
Garmin SmartMode compatible (customizable monitor presets) No
Dual-frequency (50/200 kHz) sonar capable Yes
Maximum depth

2,300 ft @ 77 kHz, freshwater

1,100 ft @ 77 kHz, saltwater

(depth capacity is dependent on water bottom type and other water conditions)

SiriusXM™ Weather & Radio compatible No
Wireless connectivity

Yes

Water temperature log and graph Yes
GCV™ Black Box sonar support Yes
Wireless mouse compatible No
NMEA 0183 input ports

1

J1939 Compatible No
Supports AIS (tracks target ships position) Yes
Polarized support No
Garmin Meteor™ Audio System compatible No
Wireless remote compatible No
Supports FUSION-Link™ compatible radios No
Transducer pin numbers 12
Bottom lock (shows return from the bottom up) Yes
NMEA 0183 output ports

1

Tide tables Yes
Power consumption

15W

Garmin Radar compatible No

WHAT IS IN THE BOX?
  • ECHOMAP UHD 73sv with LakeVü g3 for U.S.
  • GT56UHD-TM transducer
  • Power/data cable
  • Tilt/swivel mount with quick release cradle
  • Flush mount
  • Protective cover
  • Hardware
  • Documentation
$899.99

Ketch ID

This product will fit Ketch X, Karbonate, and board & cradle (All sizes)
Slides on your Ketch board for easy maneuvering
Adjustable to fight against sunlight
Comes with ID Card holder
Note: Before applying dual loc to clear ID Holder, clean surface for better adhesion
$29.99

Ketch Keeper

Mount your Ketch Board anywhere
Fits all Ketch Boards
Standard Kit comes with 10-32 3/8” bolts 10-32 t-nuts for t-track X2 each per package.
Krate Kit comes with 10-32 x 1” Nylon lock nuts Washers X4 of each per package.
Stainless Steel Hardware
$26.99

NRS Chinook Fishing PFD

With all the organization and attachment points needed for your fishing accessories, the NRS Chinook Fishing PFD is the world's best-selling life jacket for kayak anglers. Not only is it designed to make you more effective on the water, the comfort of the Chinook simply can't be beat.

  • The Chinook is a Type III, medium profile life jacket delivering 16.0 pounds of flotation.
  • PlushFit™ foam and a high-back design combine to create an extremely comfortable vest for any type of raft or kayak seat.
  • A mesh lower-back offers added ventilation on warm days.
  • Two large, zippered pockets, sized for tackle boxes, with internal organization, plus two smaller accessory pockets with hook-and-loop closure.
  • A fifth, tool holder pocket offers quick access to pliers, line cutters or other fishing gadgets and accessories.
  • Also features a rod holder, strobe attachment point, reflective accents and knife lash tab.
  • The zippered front entry and six adjustment points offer a customized fit.
  • The Chinook carries the US Coast Guard Certification through Underwriters Laboratories (UL).

 

SIZING

 

Size Chest
XS/M 30"-42"
L/XL 42"-52"
XL/XXL 50"-56"

 

SPECIFICATIONS

Weight: 2 lbs
Category:
  • Fishing Life Jackets
  • Mesh-Back Life Jackets
  • Front-Zip Life Jackets
US Coast Guard Type: III
Profile: Medium
Design Flotation: 16.0 lbs.
Outer Fabric: 400-denier ripstop nylon
Entry System: Front zip
Pockets:
  • 5 - Front
Lash Tabs:
  • 1 - Front
Adjustment System:
  • 4 - Side
  • 2 - Shoulder
  • 1 - Waist
Features:
  • Rod holder loop
  • Strobe holder loop
  • Reflective accents
  • Pockets with internal organization
  • Shoulder strap keepers
$119.95

Omni Hook Accessory Package

Featured stock on the SS127 the Omni Hooks™ are a neat addition to your SS107 or any other kayak featuring a bungee system in the stern tankwell. Once attached to your kayak’s bungee the Omni Hooks give you the ability to lash down a variety of items with ease. Designed around the YakAttack BlakPak the Omni Hooks work amazingly well to keep your BlackPak in place while on the water and are removed just as easily. The Omni Hooks also work great with a standard milk crate or a five gallon bucket. Sold in a four pack and made in the USA.
$9.99

Power-Pole Micro Anchor w/ 8 Ft UL Spike

Power-Pole Micro Spike Driver can hold Jon boats and small skiffs up to 1,500 lbs (including passengers) and is perfect for kayaks and paddle boards. Micro anchor unit is easily-removable making storage or transfer to other vessels simple. Includes quick-release bracket. Other mounting options available including custom mounting brackets or transom mount adapters. Includes 15 ft power cord for 12v battery or if no on-board battery is available, add the Micro Battery Pak & Charger (sold separately) and go wherever adventure takes you. Micro driver unit accommodates any 3/4" spike, including the Power-Pole Ultra-lite 8' Spike.

    Features:
  • Lightweight, compact design
  • Virtually silent operation
  • streamlined user interface
    Includes:
  • Adjustable Quick-release Bracket
  • 2-button Key Fob Remote
  • Advanced Dash Switch
  • 15' Power Cord
  • 8' Ultra-lite Spike
$699.00

Seat Retention Kit, Use on all Bonafide Seats

Bungee length of 36" in addition to two seat clips are included in this kit.
$14.99

Universal Scupper Plugs S/M

This soft rubber scupper plug is designed to fit circular scuppers in your sit-on-top kayak. The conical shape and hollow design allow for the rubber construction to accommodate scupper holes ranging from 1.13” to 1.40” in diameter. The rigid center core gives you a nice place to push the plug in place and the pull tab makes for easy removal.

Sold in a 2 pack
Size - small / medium
Fits scupper holes ranging from 1.13” to 1.40” diameter
$11.95

Welding Rods - Pack of 6

Pack of 6 welding rods
$9.99

YakAttack AR Tube Rod Holder with Track Mounted LockNLoad Mounting System

The YakAttack Advanced Rod Tube™ is our take on the classic tube-style rod holder designed for spinning and casting rods and reels. It features a gimbal lock that flips into place to accommodate longer rods as well as multiple attachment points on the bottom side for rod leashes, increasing gear security. Made from marine grade polymers the AR Tube is built to last and comes with our Built for Life Guarantee. The AR Rod Tube is track-mount ready, and features the LockNLoad™ Mounting System. The LockNLoad system offers unrivaled track-mount security, but its also incredibly easy to adjust. GearTrac not included

There are 3 modes: locked, adjustment, and removal.

- From locked mode, simply squeeze a lever to go into adjustment mode.

- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.

- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.

$41.95

YakAttack BlackPak Pro Kayak Fishing Crate - 16 x 16

Product Information

Description

The original hard-sided kayak crate just got better. A lot better. Introducing the completely redesigned BlackPak Pro. 

The result of intense collaboration and more than a year of R&D and design, the BlackPak Pro is fully riggable and boasts a hinged lid, 25% weight reduction, and best-in-class functionality. Enhancements include many things you might have expected, as well as some true-to-the-brand features that no one saw coming.

Size

The BLP-PRO-16X16 is 16” x 16” x 13” (L,W,H) and weighs in at 9.1 lbs. without TetherTubes and 11.5 lbs. with the included six TetherTubes. The BlackPak Pro also comes in two other sizes, 13” x 13” and a 13” x 16”.

Construction and Assembly

Injection-molded from UV stabilized polymers, the BlackPak Pro will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.

Hinged Lid

The water shedding lid with fully adjustable hinges allows you to go from freely pivoting to a sticky setting that maintains the lid position when you let go of it, while integrated overtravel stops keep the lid within reach and limit it to a manageable angle. Sound dampening rubber bumpers ensure quiet closing of the lid, and the unique CatchLatch retention system secures the lid in a simple but surprisingly functional manner. 

Rod Holders

The included six TetherTube rod holders with integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The TetherTube rod holder mounts to the GridLoc panels using at least three of the four standoff pads, enabling several vertical positioning options. Mount them high for rods with long butts, or mount them low to elevate the BlackPak Pro into the HighNDry position. Additional TetherTubes are available for purchase as single and two packs.  

Tankwell Security

Rubber feet offer noise dampening and isolation, while Omni corner brackets enable multiple hold-down methods. They are designed as attachment points for YakAttack OmniHooks (four of which are included), generic hooks, carabiners, or simple bungee. 

Storage

Optimized for a wide variety of tackle boxes, including Plano 3700, Plano Edge, Bass Mafia Bait Coffin, Flambeau, and many more. 

Rigability

The key to customizing and accessorizing the BlackPak Pro lies in the highly revolutionary GridLoc 2D mounting system, which offers a plethora of attachment points on the inside and outside of the panels. This gives our design team a platform for which they can design a myriad of dividers, holders, and other attachments. Development of these accessories is already underway!

Features:

  • 6 Rod Holders with built-in rod leashes
  • Optimized for 3700 sized tackle boxes
  • Holds seven 3700 boxes with extra room on top for more
  • Hinged lid with secure latches
  • New lightweight construction
  • GridLoc Mounting Platform located on every panel
  • Rubberized feet and built in noise dampening features
  • Internal dimensions (L, W, H) – 14.9” x 14.9”  x 11.75”
  • External dimensions (L, W, H)  – 15.94” x 15.94”  x 13.3”
  • When measuring your kayak's tankwell add 2.75" for every side you intend to attach TetherTubes
  • 9.1 lbs. without TetherTubes and 11.5 lbs. with the included six TetherTubes
  • Build for use in harsh marine conditions
  • Includes stainless steel hardware
  • Made in the USA
  • Built for Life Guarantee
  • SKU: BLP-PRO-16X16
$174.95

YakAttack Cam Straps 12 Feet 2 Pack

The YakAttack Cam Straps are an essential for any kayak angler. The high-quality polyester webbing has a higher break strength, superior resistance to abrasion, less stretch, better UV resistance, and increased water resistance compared to common polypropylene straps sold by most companies. The custom rubber buckle cover helps prevent dents and scratches while car topping.

  • Sold in a 2 pack
  • 12 ft. long
  • 1 inch wide webbing
  • Made with high-quality polyester webbing
  • Custom rubber buckle cover
  • Buckle and webbing are made in China
  • Buckle cover and sewing are done in the USA
  • SKU: YEP-1006-12
$22.95

YakAttack Complete LockNLoad Track Base

YakAttack’s LockNLoad™ mounting system, is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad™ track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt™, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).

  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: LNL-1001
$19.95

YakAttack DoubleHeader Track Mount

In typical YakAttack fashion, they started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The end result of the DoubleHeader Track Mount was a unique addition to the YakAttack product line that allows the ability to attach various accessories using a single attachment point. If you already own two RotoGrip Paddle Holders, then simply remove the rubber washer included with your paddle holders, insert the MightyBolt through the underside of the DoubleHeader, and tighten the body of the RotoGrip. The DoubleHeader in that configuration provides the perfect offset paddle holder solution moving your paddle off the side of your kayak, freeing up track space. Let’s say you want to add dual Omega Rod Holders for crappie fishing. The mounting holes at the end of the DoubleHeader are LockNLoad compatible and allow for easy attachment of LockNLoad accessories like the Omega or Omega Pro. Looking to maximize the number of rods on your kayak for tournament day? The DoubleHeader Track Mount serves as the perfect mounting system for dual AR Tube Rod Holders.  

If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob and MightyBolt from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory-installed kayak track.

Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.

The DoubleHeader Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.

  • Made in the USA
  • Built for Life Guarantee
  • Single point of attachment
  • LockNLoad Compatible
  • Includes two sizes of Track Disks
  • DoubleHeader is 8.25” wide
  • The DoubleHeader Track Mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
$19.95

YakAttack GearTrac Hardware Kit

Includes four of each: Convertible Knobs, 1-1/2'' MightyBolts, Track Nuts, 1-1/4'' Socket Head Cap Screws. All standard 1/4-20 thread. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
  • 4 Stainless Steel MightyBolts
  • 4 Convertible Knobs
  • 4 Track Nuts
  • 4 Socket Head Cap Screws
  • All Standard 1/4-20 Thread
  • Patent Pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: HRC-1004
$24.95

YakAttack GT Cleat XL

The larger and heavier-duty version to our original GT Cleat, the GT Cleat XL™ is our simple and highly effective answer to the issue of line management. It attaches to all YakAttack® GearTrac™, MightyMount XL tracks, and most other kayak track systems. The GT Cleat XL makes for a perfect companion to our highly popular LeverLoc™ Anchor Trolley and is a low profile, easy to attach and adjust anchor line cleat. The underside of the cleat features two tabs and a rubber washer helping keep the cleat from rotating and sliding in the track from anchor line tension.  Best used with 1/2" rope.

  • Compatible with YakAttack GearTrac, MightyMount, and most other factory-installed kayak track systems
  • Best used with 1/2" rope
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: MTA-1004
$19.95

YakAttack HD Mount LockNLoad

YakAttack’s LockNLoad™ mounting system is exactly what you would expect from the leader in track mounting technology. Now, enjoy the versatility and ingenuity of the LockNLoad System in heavy duty applications such as trolling for big game. Due to the two MightyBolt attachment points, the HD Track Mount gives you more gear security than ever before! No track? No problem! You can easily remove the two MightyBolts and use hardware to quickly deck mount your YakAttack rod holder or fish finder, as well as using holes from old-school deck mounts to mount the HD Track Mount crossways. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

 

  • Two MightyBolt attachment points gives you better gear security
  • Not for use with under 8" of track
  • For Heavy Duty applications
  • Can be used for deck mounting
  • Utilizes pre-drilled holes from old-school deck mounts to be mounted crossways
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: LNL-1006
$19.95

YakAttack Horizontal Tie Downs

This track mounted tie-down allows a quick and easy attachment point for webbing, small ropes, and bungee in configurations in which the Vertical Tie Down is not ideal. Perfect for securing Blackpaks™, other crate systems, and large gear bags in a kayak tankwell. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

  • Sold in 2 pack
  • Attaches to YakAttack® GearTrac™, MightyMounts, and most other factory installed kayak track
  • Use with 1"-1.5" webbing straps or bungee
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: AAP-1027

$19.95

YakAttack Leverage Landing Net, 20 Inch x 21 Inch Hoop with Foam Extension

The revolutionary forearm grip featured on the Leverage Landing Net offers unparalleled stability and control, while the hinged design allows the handle to fold alongside the net for compact and easy stowage which make the Leverage Landing Net the best net when kayak fishing. The high level of control and accuracy offered by the forearm grip means you don't need a giant hoop to net your next big fish and makes the Leverage Landing Net an essential piece of kayak fishing gear. This model of the Leverage Landing Net features a foam covered extension on the handle allowing for the net to be stored in a tube style or flush mount rod holder. 
  • Revolutionary Forearm Grip
  • Folds for Easy Storage
  • Full Rubber Net
  • Extended Foam Covered Handle
  • Wider, more traditionally designed hoop
  • 20" X 21" Hoop
  • 54" overall length

Leverage Landing Net is a registered trademark of YakAttack, LLC

  • Netting is molded in Taiwan
  • All other components are made and assembled in the USA
  • Covered by our Built for Life Guarantee
$89.95

YakAttack LeverLoc Anchor Trolley HD

The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord with a highly reflective tracer. This model features the HD option, which gets you two extra PadHooks plus backing plates for the pulleys and LeverLoc™, enabling a heavy duty install when compared to the self-threading screws included in the standard kit. Features YakAttack Stealth Pulleys for super smooth operation. The use of a YakAttack Rigging Bullet, RB1032, is highly recommend for installs where the install location is out of arms reach.

  • Easy installation
  • New YakAttack Stealth Pulleys
  • 35' of highly reflective USA-made 550 paracord
  • Includes all necessary hardware for installation
  • Heavy duty
  • Includes backing plates and extra Padhooks not included in AMS-1003.
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: AMS-1004
$44.95

YakAttack Lowrance Hook2 Fish Finder Mount with Track Mounted LockNLoad Mounting

Designed to replace the factory base on Lowrance Hook2 4 and 5, Reveal 5, and Simrad Cruise 5. This Lowrance Fishfinder Mount is a simple, clean, and a highly effective solution. This mount improves on the original included mount enabling fast and easy one-handed display adjustment. Includes the LockNLoad Mounting System for maximum versatility and rigidity. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).

  • GearTrac not included
  • Fishfinder not included
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • Patent Pending
  • SKU: FFP-1006
$49.95

YakAttack MightyMount II with FullBack plate

The MightyMount II is a low profile, highly versatile mount with a small footprint and the same hole pattern as the original MightyMount. Used for attaching accessories requiring a single t-bolt attachment point or YakAttack products that feature the LockNLoad™ mounting system like rod holders, fish finders, and more.

Mighty Mount II is 2"x2.375"x.5"
Contains all necessary hardware
$16.95

YakAttack MightyMount XL 12"

Designed as a robust but economical mount for longer footprint areas, the MightyMount XL can be installed with screws and nuts, self-threading screws, or even tri-fold rivets! Compatible with all YakAttack track mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the MightyMount XL one of the best looking accessory mounts on the market.

  • 1.75" wide x 12" long
  • .38” tall
  • Includes #10 stainless steel self-threading screws 
  • Made in the USA
  • Made from premium materials designed for use in harsh marine environments   
  • Usable track length - 10.5"
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: MMXL-12
$16.95

YakAttack MultiMount Cup Holder

YAKATTACK MULTIMOUNT CUP HOLDER

The YakAttack MultiMount Cup Holder quickly and easily attaches to YakAttack GearTrac, MightyMount, Native Watercraft gear track, Bonafide Kayaks Gear Track and most other kayak track systems.


Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene Bottles to 12 oz cans and water bottles.
The MultiMount Cup Holder also makes a great place to put small tools and other items. Made from premium materials for a lifetime of use in even the harshest environments.
Keep your beverage at reach while kayak fishing with the MultiMount Cup Holder!

KEY FEATURES

  • Fits various different size beverage containers
  • Large enough to store a can with a koozie
  • GearTrac and MightyMount ready without any additional components
  • Bottle not included

$19.95

YakAttack Omega Rod Holder with Track Mounted LockNLoad Mounting System

The Omega Rod Holder attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.

There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:

- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
$31.95

YakAttack PanFish Portrait Pro Camera Mount

The LockNLoad™ track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.

The ultra-durable construction of the PanFish Portrait Pro™ is not only super lightweight - it's also incredibly rigid, reducing shake in your camera footage.

Utilizes the LockNLoad™ Track Mount System for easy on and off, angled articulation, and rotational pivoting
Durable, lightweight, and super rigid construction
Features the new YakAttack Camera Ball
For use with camera utilizing a 1/4-20 mount or GoPro Cameras
11.5" Tall
$59.95

YakAttack PanFish Pro Camera Mount

The LockNLoad™ track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.



The ultra-durable aluminum construction of the PanFish Pro™ is not only super lightweight - it's also incredibly rigid, reducing shake in your camera footage.In addition, the patented design allows for one-hand rotation without loosening or tightening the product, giving you the ability to get the smoothest pan shot.

Utilizes the LockNLoad™ Track Mount System for easy on and off, angled articulation, and rotational pivoting
Durable, lightweight, and super rigid aluminum construction
Features the new YakAttack Camera Ball
It floats!
For use with camera utilizing a 1/4-20 mount or GoPro Cameras
33" Tall
$99.95

YakAttack ParkNPole 7'8"

The YakAttack ParkNPole 7'8" is the updated version of our ParkNPole 8' that better complies with UPS shipping restrictions.
 
Used as a stakeout/push pole for kayaking, this product has many great features including a floating base, a fiberglass body, and a foot and tip that are UV stable and made of wear-resistant nylon. Lightweight and incredibly durable, this product makes the perfect companion for fishing in shallow waters.
  • Foot for paddling
  • Tip for staking into the ground
  • 7' 8" long
  • .845'' Diameter Tubing
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: PNP78
$99.95

YakAttack ParkNPole Link 8'

The ParkNPole Link™ is a smarter, two-piece version of the popular 8' ParkNPole™. The two-piece construction makes transportation easy to and from the water or makes it possible to store inside the hull of your fishing kayak. For a longer option purchase the 46'' extension making the total length 12'. At 12 feet, the ParkNPole Link™ plus the extension, make for a great push pole and also helps when anchoring in deeper water. Made from specially formed fiberglass and UV stabilized, wear resistant nylon. At 1.8 lbs, it is incredibly lightweight and extremely durable.

  • 8' long
  • .845'' Diameter Tubing 
  • Purchase the 46" extension for an extended length of 12'
  • Wear-resistant nylon tip and foot with a fiberglass body
  • Weights only 1.8 lbs, yet is extremely durable.
  • The two-piece construction allows for easy transportation and storage.
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: PNPL-8
$129.95

YakAttack ParkNPole RotoGrip

Since launching the YakAttack ParkNPole a number of years ago customers have been requesting a track mounted solution to secure their stakeout pole. This product is compatible with every length of YakAttack ParkNPole including the 6', 7' 8", and 8' Link. Using our popular RotoGrip platform, larger wheels were designed to perfectly secure the 0.84” ParkNPole diameter tubing. Super low profile at 2.4" tall, the ParkNPole RotoGrip secures the shaft between two soft rollers, securing your stakeout pole quietly and with just the right amount of tension. Sold as a single pack.

To secure your ParkNPole off the side of your kayak, the ParkNPole RotoGrip pairs nicely with a set of SideArm Track Mounts or the DoubleHeader Track Mount. Compatible with YakAttack MightyMount’s, GearTrac, and most other factory installed kayak track systems and aftermarket track from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

  • Utilizes the Mighty Bolt to attach to kayak track
  • 2.4" tall
  • GearTrac not included
  • Single pack
  • Patent Pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: GRP-1004
$16.95

YakAttack RotoGrip Paddle Holder

Voted Product of the Year for Yak Angler's Kayak Anglers Choice Awards for 2016. 

The YakAttack RotoGrip™ Paddle Holder sheds a new light on the age old problem of paddle management. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Kayak and SUP anglers have lots of options for installing and configuring this handy little gadget. Super low profile at 2.25" tall, the RotoGrip™ Paddle Holder grips the paddle shaft between two soft rollers, securing your paddle quietly and with just the right amount of tension. Sold in single packs.

  • Utilizes the Mighty Bolt to attach to kayak track
  • 2.25" tall
  • GearTrac not included
  • Single pack
  • Patent Pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: GRP-1001

$16.95

YakAttack Rotogrip SnapNStrap 2 Pack

The SnapNStrap Security Tether was specifically designed for the YakAttack RotoGrip Paddle Holder; RotoGrip not included. It acts as a simple hook and loop system using bungee to add extra security and peace of mind knowing your paddle is safe and secure. To attach the SnapNStrap system, simply remove the rubber washer and MightyBolt from your RotoGrip and slide on the molded frame with the two tabs facing upwards. Apply a little pressure, and the system will snap in place. From there, reassemble the washer and MightyBolt. To secure your paddle, wrap the bungee and pull tab over the shaft of your paddle and loop it over the tab of the SnapNStrap frame.

  • RotoGrip not included
  • Tool-less attachment
  • Compatible with the RotoGrip Paddle Holder
  • Sold as a 2 pack
  • Made in the USA
  • Lifetime Warranty
$7.95

YakAttack Round Base Fish Finder Mount with Track Mounted LockNLoad Mounting System

No more ball mounts, no more slipping or rotating in the track. With the LockNLoad™ mounting system this is the cleanest and most secure mounting solution for Garmin and Raymarine units featuring a 3 hole pattern round base such as the Garmin Striker 4 and the Raymarine Dragonfly 7 Pro. Features the LockNLoad mounting system offering ultra secure attachment.
$49.95

YakAttack SideArm Track Mount

The YakAttack SideArm Track Mount was born out of using existing products to solve a rigging problem. Instead of using a standard 4” Extension Arm with a longer MightyBolt to offset a RotoGrip Paddle Holder, we created an off-the-shelf solution that accomplishes the task and then some. Any YakAttack track-mounted product that uses a single MightyBolt is compatible with the MightyMount at the end of the SideArm. You can also replace the knob of the SideArm with a LockNLoad accessory like a YakAttack Omega Rod Holder or PanFish Portrait Camera Mount. This feature provides the opportunity to mount two accessories from a single point. The RotoGrip Paddle Holder and ParkNPole RotoGrip are two commonly used accessories with the SideArm Track Mount.

Included with the SideArm Track Mount are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system was included with your kayak, try both of them and determine which one will provide the best fit. Only one Track Disk is needed on the underside of the SideArm for the mount to work as designed. In addition, the Track Disks allow for the SideArm to be mounted in any direction in relation to the track or MightyMount it is attached to. For example, you can set up the SideArm directly off the side of your kayak for a paddle holder solution or having it facing inwards and virtually 360º anywhere in between.

Compatible with YakAttack MightyMount’s, GearTrac, and most other factory installed kayak track systems and aftermarket track from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

The SideArm Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.

  • Made in the USA
  • Built for Life Guarantee
  • Single point of attachment
  • LockNLoad Compatible
  • Includes two sizes of Track Disks
  • The SideArm Track Mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
  • SKU: TMA-1003
$19.95

YakAttack SideWinder Anchor Line Reel, Includes Track Hardware and 75 Feet of 550 Paracord

Get your anchor line under control with the YakAttack SideWinder! Designed to make anchor line management simple and effective, the YakAttack SideWinder has some great features packed into a simple and effective design. The line lock groove keeps just the right amount of line deployed, and the tail rope passage means it can be deployed outside your kayak anchor trolley ring for true quick release in dangerous situations. For flat water with no current, use the track mount holes in conjunction with the included Mighty Bolts and knobs to attach the SideWinder directly to your kayak's track system..

Includes hardware for install onto your kayak's track system
Includes 75 feet of 550 paracord
14"x6.38"x0.75"
Geartrac not included
$34.95

YakAttack Surface Mount Retractor

Secure your gear without bulky leashes or floats using the YakAttack Surface Mount Retractor. This super versatile unit combines the innovation you've come to expect from YakAttack and genuine T-Reign retracting mechanism, 36" Kevlar cord, and a removable 4" tether. Designed for surface mounting, this kit comes complete with blunt end thread forming screws for threading directly into rotomolded and thermoformed kayaks.
  • Made from UV Resistant High Density Polyethylene
  • 36" Kevlar Cord
  • Removable 4" tether
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: RET-1001
$29.95

YakAttack Tie-Down Eyelets 2 pack

These tie-downs come with a Mighty Bolt base. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Perfect as an anchoring point to secure a cooler or other accessory, as well as being a great adjustment point for directing steering cables on the deck of your kayak. Sold in a two-pack.
  • Patent Pending
  • 2 Pack
  • Made of stainless steel
  • Compatible with GearTrac, MightyMounts, and most other factory-installed track systems
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: AAP-1016
$16.95

YakAttack Torqeedo Throttle Mount

YAKATTACK TORQEEDO THROTTLE MOUNT WITH TRACK MOUNTED LOCKNLOAD MOUNTING SYSTEM (TQM-1001)

Featuring the LockNLoad mounting system this throttle mount is a great solution for attaching your Torqeedo throttle to YakAttack GearTrac, MightyMount II, MightyMount XL or most other factory-installed kayak track. The LockNLoad base gives you peace of mind offering an ultra secure install, but is also very easy to adjust on the water and attach or remove. Includes all necessary hardware. Patent pending. Torqeedo throttle not included. Compatible with YakAttack MightyMounts, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

The LockNLoad track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:

  • From locked mode, simply squeeze a lever to go into adjustment mode.
  • In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the accessory is completely secure while making adjustments. Let go of the lever and you are back in locked mode.
  • To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
  • GearTrac and Torqueedo throttle not included
  • Made in the USA
  • Patent Pending
  • SKU: TQM-1001
$49.95

YakAttack Track Mounted Retractor

Secure your kayak fishing gear without bulky leashes or floats using the YakAttack Track Mount Retractor. This super versatile unit combines the innovation you've come to expect from YakAttack and genuine T-Reign retracting mechanism, 36" Kevlar cord, and a removable 4" tether. Designed for track mounting, this kit comes complete with everything you need.
GearTrac not included.


  • UV Resistant High Density Polyethylene
  • 36" Kevlar Cord
  • Removable 4" tether
$34.95

YakAttack Track Nut Kit, 6pk

1/4-20 track nut. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible.
  • Pack of 6 track nuts
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: TN-1420-6
$11.95

YakAttack Universal Mounting Plate

This product is a DIY mount and you will be required to drill holes to mount something like a Humminbird PiranhaMAX 4 to the mounting plate. Since every install will most likely be different no extra screws, nuts, or washers are included, and it is up to the user to find their own hardware for this install.

Mounting plate is 6" x 3.5"
$49.95

YakAttack Vertical Tie Downs Track Mount 2 pack

The YakAttack Track Mount Vertical Tie Downs come with a Mighty Bolt base. erfect as an anchoring point to secure a cooler or any other accessory to the track. Designed to work with 1'' and 1.5'' flat webbing and can also be used with bungee. Made in the USA from premium materials for a lifetime of use in even the harshest environments. Sold in a 2 pack.
$19.95

YakAttack VISICarbon Pro, MightyMount and GearTrac ready

Designed to meet the needs of all anglers- from serious kayak fishermen to recreational paddlers- the VISICarbon Pro™exhibits unprecedented performance in light weight, low drag, and portability- all with plenty of style. The ultra-thin mast and instantly recognizable flag combine to offer excellent performance with low wind resistance, and enhances your visibility on the water, night and day. The VISICarbon Pro™ light is complete with an LED module, which will burn for 100 hours on 3 AA batteries (included) and provides 360° visibility. The Silent Snap flag attachment provides a secure fastening that can be left for hours, or removed in seconds. The collapsed unit fits inside the flag for easy organization, creating a convenient and portable storage solution at only 14" long. The deployed VISICarbon Pro™ is 48" long. The SilentSlip foam at the base of the unit floats, but still fits into most flush mount and tubular rod holders. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems.

Enhances your visibility day or night.
SilentSlip foam fits most flush mount and tubular rod holders.
48" long deployed, 14" collapsed.
Collapsed unit stores inside flag.
It floats!
Designed with carbon fiber tubing for stiffness and ultra light weight.
Silent Snap flag attachment system provides quick and easy flag installation and removal.
LEDs burn 100 hours on 3 AA batteries (included).
10,000+ hours lamp life.
$94.95

YakAttack Zooka II Rod Holder with Track Mounted LockNLoad Mounting System

The Zooka II attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.

There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:

- From locked mode, simply squeeze a lever to go into adjustment mode.

- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.

- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
$41.95

Follow us on social media!