Thanks for registering your SS107!

Now that you have registered your kayak, let us help you create the best experience on the water

Accessories

Access Plate Accessory Package

Installed on both the SS Series and RS117 fishing kayaks the stern Access Plate allows for easy access when you need to get inside the hull of your kayak to do an install. Common times this comes in handy include installing a rudder, electronic motor, anchor trolley, or a Power-Pole Micro Anchor. Included with this kit are one access plate and four 10/32 stainless screws. Made in the USA.
$19.99

Bonafide Fin Dome Tag Accessory Package

By popular demand, the fin icon dome decal is now available for purchase! This decal is featured on each of our kayaks, and is the perfect way to show that you're a part of the Bonafide family.
$2.99

Bonafide Flex Wings, SS Kit

Introducing the new FlexWings™ from Bonafide Kayaks. With being the only kayak brand on the market with dual skid plates it presented itself with a unique opportunity to do something different than a skeg or rudder and the FlexWings were the result of months of research and development to further enhance the tracking and performance of your Bonafide SS107 and SS127. The FlexWings install underneath the stock Dual Skid Plates using the stock hardware.   With the FlexWings facing towards the inside they effectively manage the turbulent water flowing off the stern and result in tracking and performance unlike anything we have ever experienced. Made in the USA from flexible yet stiff rubber the FlexWings can be dragged and paddled over rocks and timber without any concern of your kayak being damaged. Sold as a pair.  Hardware not included.
$29.99

Bonafide Hinge-Dry Pod Accessory Package

The same Doubleheader™ Hinge found on the bow hatch of the SS127 is seen on the forward side of the Dry Pod on the SS107 and SS127 fishing kayaks. The hinge allows the Dry Pod to easily be lifted forward giving you the ability to remove any debris from your fish finder’s transducer. To completely remove the Dry Pod from your kayak simple move the latch to the open position, release the rubber strap, and the Dry Pod can be quickly removed and stored in your vehicle while transporting your kayak to keep your valuables in a safe location. Made in the USA.
$9.99

Bonafide Karbonate Board

Bonafide Branded
KBF Approved
High color yellow that’s easy to read and extremely durable.
Built in Cradle
$43.99

Bonafide Kayak Covers

Bonafide Kayak Covers are custom made to fit our kayaks just right. Each cover includes a full set of cover tie down straps (one for each loop set - 5 or 6) that can be used to secure the cover when traveling through the sewn in loops on the cover. All covers are made in USA and created with marine-grade anti-wick thread that includes double-stitched construction and 4-ply join seams.

$184.99

Bonafide Ketch X Board

Bonafide Branded
Tether holes CNC machined on fence end of the board.
High color contrast that’s easy to read and extremely durable.
Tournament numbers on top of Kradle edge
Ketch Kradle incorporated into board (all one piece)
Widened fence
$69.99

Bonafide Side Clip-Dry Pod Accessory Package

Featured on the Bonafide SS107 and SS127 sit-on-top fishing kayaks these side clips are used to close the lid of your Dry Pod™. Working off a simple cam action the side clips are easy to open when needing to access your gear or fish finder battery and close just as easily maintaining a secure tight fit. Sold in a two pack and made in the USA.
$6.99

Bonafide Strap-Dry Pod Accessory Package

Featured on the SS107 and SS127 and used to retain the Dry Pod in a downward position this strap gives you the ability to quickly hinge your Dry Pod forward and lock it back in place. This strap is full rubber and easy to grip in wet or dry conditions. Included with this kit are the Dry Pod Strap, washer, and stainless hardware. Made in the USA.
$6.99

Bungee Lock Deck Loop Accessory Package

A last minute design update on our standard Deck Loop turned out to be a really unique feature on the SS107 and SS127 sit-on-top fishing kayaks. Typically when a pad eye is used to manage bungee there is a knot that protrudes from the deck loop, but in this case we turned a common problem into a unique feature that conceals and hides the knot under the deck loop resulting in a super clean install and works great in use with our side handle paddle holder. Sold in a 4 pack and includes stainless steel hardware. Made in the USA.
$9.99

Captain's Bridge Accessory Mount Crossbar

Create the ultimate kayak fishing console with the Captain's Bridge. With dual mounting tracks on the top of the console as well as a track running down each side, their are many ways to mount you fish finders and other kayak fishing accessories.

1. Mounting width on the kayak: The Captain's Bridge will fit on a wide variety of fishing kayak models. For models with gear tracks on the port and starboard sides, it can slide right into the tracks. For models that do not have tracks but a flat surface, anglers can add YakAttack Mighty Mounts to attach the Captain's Bridge. You can measure the width of where you would like to place the Captain's Bridge. Here are the maximum mounting widths required:
    • The maximum mounting width of the 26" Captain's bridge is 25" 
    • The Maximum mounting width of the 32" Captain's bridge is 31"
      • Additional Note regarding the Titan X and PWR Mounting:  The 26" and the 32" will both fit on the Titan X in the bow mounting area and across the gunnel. If you are using a Pedal Drive you will want to mount in the bow area. For the PWR, both sizes will fit on the bow mounting area of the PWR and only the 32" will fit across the gunnel.
  • Tip: When going more towards the bow of the boat, the 26" might be better whereas mounting on the gunnels may be a better fit for the 32" due to the mounting width requirements stated above.

2. The screen size for your graphs: For example: If you are wanting to put dual monitors over 9" you may want to use the 32" to provide more space on the bar.

$139.99

Deck Hook Accessory Package

Used in conjunction with the Deck Loops the Deck Hooks are a low profile modern take on a classic j-hook and is used to manage bungee in the stern tankwell of the SS127, SS107, and RS117. They can also be found on the side handle paddle holder seen on the SS107 and SS127 sit-on-top fishing kayaks. Sold in a 6 pack and includes stainless steel hardware. Made in the USA.
$9.99

Dual Action Foot Brace Set with Grey / Black Traction Pads

Our proprietary Dual Action Foot Braces™ are more than meets the eye. Featured on the SS127 and SS107, they quickly adjust from an extremely rigid foot brace to free sliding rudder controls with a simple flip of a switch. This is just one of the many unique features of the SS series that makes Ultimate Fishability. This kit includes a pair of Dual Action Foot Braces with the grey deck traction and black outline. . Our traction pads are made from a UV resistant closed cell PE/EVA foam that is made to last and aids in comfort, grip, and noise reduction.
$39.99

Footbrace Rails Accessory Package

Featured on the SS127 and SS107, the track used with our foot braces are strong, rigid, and are made from anodized aluminum. With the same or similar foot braces being used in just about every fishing kayak on the market we knew there was some major room for improvement when designing the components for the Bonafide SS series kayaks. Sold in a pair and includes stainless steel hardware. Dual Action Foot Braces sold separately. Made in the USA
$39.99

FRABILL - Bearclaw Kayak Fishing Net

Kayakers, paddle boarders and anyone fishing with one hand free can now achieve powerful catches with the Trophy Haul™ Bearclaw Night. Simply wrap the support bar around the forearm and grab the handle right at the yoke for easy one-handed operation. The conservation netting and asymmetrical design protect fish as they smoothly slide into the flat bottom.

  • HANDLE LENGTH: 18"
  • HANDLE TYPE: BEARCLAW
  • HOOP SHAPE: MESHGUARD™
  • HOOP SIZE: 14" X 18"
  • SIMPLE HANDLE TYPE: FIXED
  • SIMPLE NETTING TYPE: COATED
  • YOKE: TROPHY HAUL
$99.99

Garmin ECHOMAP UHD 73sv, US w/GT56

Take fishing to the next level.

SONAR SUPPORT

This chartplotter supports a variety of Garmin transducers (sold separately), including the Panoptix LiveScope™ scanning sonar system, which lets you see all around your boat in real time.

VIVID COLOR PALETTES

High-contrast vivid scanning sonar color palettes make it easier than ever to distinguish targets and structure.

OPTIONAL TRANSDUCER BUNDLE

Select the transducer bundle to add a GT56 transducer for Garmin CHIRP traditional sonar and Ultra High-Definition ClearVü and SideVü scanning sonars. With three scanning sonar frequencies and 20% greater range for our UHD SideVü sonar, you’ll get top performance at all depths.

PRELOADED MAPPING

Experience unparalleled coverage and detail with preloaded LakeVü g3 inland maps featuring integrated Navionics® data. Maps cover more than 18,000 lakes with up to 1’ contours.

QUICKDRAW CONTOURS

Create personalized fishing maps on-screen with 1’ contours. Keep the data to yourself, or share it with the Quickdraw Community on the Garmin Connect™ app3.


 


Boat connected.

NETWORK CAPABLE

If you have multiple compatible ECHOMAP UHD or ECHOMAP Ultra devices on your boat, the 7” and 9” models can share information — such as sonar, user data and charts — with them.

NMEA 2000® AND NMEA 0183 NETWORKS

Connect to your compatible autopilots, digital switching, weather, Fusion-Link audio system, media, VHF, AIS, engine data, heading sensors — such as the SteadyCast sensor — and more from one screen.

ACTIVECAPTAIN® APP

Built-in Wi-Fi® connectivity pairs with the free all-in-one mobile app for access to the OneChart™ feature, smart notifications, software updates, Garmin Quickdraw™ Community data and more1.

FORCE™ TROLLING MOTOR COMPATIBILITY

Take control of the most powerful and efficient trolling motor available2, route it to waypoints, follow tracks and more from the screen of your chartplotter.

ENGINE CONNECTIVITY

Connect this chartplotter to different kinds of engines — including select Mercury and Yamaha® models — to see RPMs, fuel flow, temperature, trim and other important information at a glance. You may need additional hardware, so be sure to check with your engine manufacturer.


 SPECIFICATIONS

Physical & Performance

Display size 6.1" x 3.4"; 7.0" diagonal (15.5 x 8.6 cm; 17.8 cm diagonal)
Display resolution 400 x 800 pixels
Physical dimensions 9.8" x 5.5" x 2.0" (25 x 13.9 x 5.1 cm)
Receiver

5 Hz

Water rating

IPX7

Weight

1.7 lbs.(0.77kg)

Mounting options Bail or flush
Display type WVGA display
Antenna Internal or external over NMEA 2000

Maps & Navigation

Preloaded maps

LakeVü g3 (inland maps)

Accepts data cards

1 microSD™ card; 32 GB maximum size

Routes 100
Track log 50,000 points; 50 saved tracks

Features

ClearVü

Yes with CHIRP (built-in)

Waypoints

5,000

Transmit power 500 W (RMS) / 4,000 W (peak to peak)
NMEA 0183 compatible Yes
Dual-beam (77/200 kHz) sonar capable Yes
Supports DSC (displays position data from DSC-capable VHF radio) Yes
NMEA 2000® compatible Yes
ActiveCaptain compatible Yes
Sonar recording Yes
Garmin Marine Network™ ports

1 Panoptix™ port

Garmin Sonar compatible Yes
GSD™ Black Box sonar support No
Sonar history rewind Yes
Garmin SmartMode compatible (customizable monitor presets) No
Dual-frequency (50/200 kHz) sonar capable Yes
Maximum depth

2,300 ft @ 77 kHz, freshwater

1,100 ft @ 77 kHz, saltwater

(depth capacity is dependent on water bottom type and other water conditions)

SiriusXM™ Weather & Radio compatible No
Wireless connectivity

Yes

Water temperature log and graph Yes
GCV™ Black Box sonar support Yes
Wireless mouse compatible No
NMEA 0183 input ports

1

J1939 Compatible No
Supports AIS (tracks target ships position) Yes
Polarized support No
Garmin Meteor™ Audio System compatible No
Wireless remote compatible No
Supports FUSION-Link™ compatible radios No
Transducer pin numbers 12
Bottom lock (shows return from the bottom up) Yes
NMEA 0183 output ports

1

Tide tables Yes
Power consumption

15W

Garmin Radar compatible No

WHAT IS IN THE BOX?
  • ECHOMAP UHD 73sv with LakeVü g3 for U.S.
  • GT56UHD-TM transducer
  • Power/data cable
  • Tilt/swivel mount with quick release cradle
  • Flush mount
  • Protective cover
  • Hardware
  • Documentation
$899.99

Hi Rise Seat Accessory Package

Out of any feature on your kayak you probably spend more time sitting in your seat than using any other feature, and an uncomfortable seat is going to lead to an unpleasant experience and limit your time on the water. Even if you don't have a bad back most kayak seats provide support in all the wrong places and make long extended days on the water tough. Featured on both the Bonafide SS107 and SS127 sit-on-top fishing kayaks, the HiRise Seat puts you in a higher vantage point and allows your legs and feet to rest in a more natural position eliminating pressure on your lower back. With padded breathable mesh and adjustable tension you will be able to adjust the seat to your desired comfort level and preference. Featuring a high and low position and three trim positions while in the low position the HiRise Seat and Seat Rack provide several seating options in your Bonafide Kayak to help maximize your level of comfort while on the water. Included in this package is one complete Bonafide Hi Rise Seat. Made in the USA.
$399.99

Hinge-SS107 Bow Hatch Accessory Package

Replacement SS107 Bow Hatch Hinge.
$9.99

Junk DRAWER Accessory Package

Besides hull design, the main aspect that makes a fishing kayak a fishing kayak is storage and organization for rods, tackle, and assorted gear. The Junk Drawer solves those issues in a simple sliding tray located underneath our HiRise™ Seat and is featured stock on the SS127 sit-on-top fishing kayak. The Junk Drawer can be add to the SS107 utilizing the stock YakAttack GTSL90 GearTrac located underneath the seat. This allows the Junk Drawer to be slid in and out from underneath the seat to help you find the right bag of bait or other quick access tackle and gear. To aid in rod management the Junk Drawer features four grooves to keep your rods in place and within an arm’s reach. With easy to access gear and rod management the Junk Drawer is just one feature that creates ultimate fishability. Included in this kit is one thermoformed Junk Drawer, Mighty Bolt, and ¼”-20 knob. Made in the USA.

COMPATIBLE ON THE SS107 and SS127.

$49.99

Junk Drawer COVER

Designed to fit the stock JunkDrawer included with the Bonafide SS127 the new JunkDrawer Cover heightens the utility of the already useful JunkDrawer. Most kayaks and fishing kayaks lack quick access storage within easy reach for grab and go items and the JunkDrawer was a unique solution to that problem. Now, with the addition of the mesh cover you have a highly secure storage compartment with added zippered pockets for even better organization. The cover easily attaches and detaches from your JunkDrawer using the built in notches on each corner of the JunkDrawer and the bungee on the cover. Made in the USA.
$29.99

Ketch ID

This product will fit Ketch X, Karbonate, and board & cradle (All sizes)
Slides on your Ketch board for easy maneuvering
Adjustable to fight against sunlight
Comes with ID Card holder
Note: Before applying dual loc to clear ID Holder, clean surface for better adhesion
$29.99

Ketch Keeper

Mount your Ketch Board anywhere
Fits all Ketch Boards
Standard Kit comes with 10-32 3/8” bolts 10-32 t-nuts for t-track X2 each per package.
Krate Kit comes with 10-32 x 1” Nylon lock nuts Washers X4 of each per package.
Stainless Steel Hardware
$26.99

NRS Chinook Fishing PFD

The evolution of NRS Chinook Fishing PFD, our best-selling life jacket, depends on our designers listening to the reviews of anglers around the world. And we do. With reconfigured pocket designs, the Chinook makes catching the adventure safer and more effective on the water.

 

  • The Chinook is a Type III, medium profile life jacket delivering 16.5 pounds of flotation.
  • Zippered front entry for quick donning and six adjustment points for a customized fit.
  • PlushFit™ foam and a high-back design combine to create an extremely comfortable vest for any type of raft or kayak seat.
  • A mesh lower-back offers added ventilation on warm days.
  • Two large clamshell pockets, sized for tackle boxes, feature updated internal organization based on angler reviews.
  • A single, exterior pocket on the angler's right side offers easily accessible storage.
  • A fifth, tool holder pocket offers quick access to pliers, line cutters or other fishing gadgets and secures with a hook-and-loop fastener.
  • Also features a rod holder, strobe attachment point, reflective accents and knife lash tab.
$119.95

Omni Hook Accessory Package

Featured stock on the SS127 the Omni Hooks™ are a neat addition to your SS107 or any other kayak featuring a bungee system in the stern tankwell. Once attached to your kayak’s bungee the Omni Hooks give you the ability to lash down a variety of items with ease. Designed around the YakAttack BlakPak the Omni Hooks work amazingly well to keep your BlackPak in place while on the water and are removed just as easily. The Omni Hooks also work great with a standard milk crate or a five gallon bucket. Sold in a four pack and made in the USA.
$9.99

Power-Pole Micro Anchor w/ 8 Ft UL Spike

Power-Pole Micro Spike Driver can hold Jon boats and small skiffs up to 1,500 lbs (including passengers) and is perfect for kayaks and paddle boards. Micro anchor unit is easily-removable making storage or transfer to other vessels simple. Includes quick-release bracket. Other mounting options available including custom mounting brackets or transom mount adapters. Includes 15 ft power cord for 12v battery or if no on-board battery is available, add the Micro Battery Pak & Charger (sold separately) and go wherever adventure takes you. Micro driver unit accommodates any 3/4" spike, including the Power-Pole Ultra-lite 8' Spike.

    Features:
  • Lightweight, compact design
  • Virtually silent operation
  • streamlined user interface
    Includes:
  • Adjustable Quick-release Bracket
  • 2-button Key Fob Remote
  • Advanced Dash Switch
  • 15' Power Cord
  • 8' Ultra-lite Spike
$699.00

Seat Rack Accessory Package

Our proprietary seat positioning system, the Seat Rack™, was a simple solution that quickly locks and unlocks the feet on our High Rise™ Seat eliminating the use of straps, track, and knobs used to attach seats on sit-on-top fishing kayaks in the past. Simply flip the lever on the Seat Rack from the open position to the locked position and the High Rise Seat is quickly locked in place. Included in this kit is a pair of complete Seat Racks with the needed attachment hardware. Made in the USA.
$39.99

Seat Retention Kit, Use on all Bonafide Seats

Bungee length of 36" in addition to two seat clips are included in this kit.
$14.99

Skid Plate, SS Accessory Package

Replacement Skid Plates for the SS models.
$12.99

SS Fat Grip Bow Handle Accessory Package

For the SS107 and SS127 we knew we needed to design a handle that was not only comfortable in your hand while carrying your kayak to and from the water, but also we wanted it to be the closest thing to your body while being carried. With the handle being the closest point of contact to you it makes it much easier to carry while keeping your back in an upright natural position. The diameter of the handle is wider than most kayak handles yet more narrow than molded in handles making it the perfect size to maximize grip strength and comfort.
Attached on the underside of the Fat Grip Handle is a highly comfortable rubber insert that won’t cause any pressure points, add grips, and evenly distributes the load of your fully rigged or unloaded fishing kayak in an easy to grip carry handle. Included in this kit is the assembled Fat Grip Bow Handle and stainless steel hardware. Made in the USA.

$19.99

SS Fat Grip Stern Handle Accessory Package

For the SS107 and SS127 we knew we needed to design a handle that was not only comfortable in your hand while carrying your kayak to and from the water, but also we wanted it to be the closest thing to your body while being carried. With the handle being the closest point of contact to you it makes it much easier to carry while keeping your back in an upright natural position. The diameter of the handle is wider than most kayak handles yet more narrow than molded in handles making it the perfect size to maximize grip strength and comfort.
Attached on the underside of the Fat Grip Handle is a highly comfortable rubber insert that won’t cause any pressure points, add grips, and evenly distributes the load of your fully rigged or unloaded fishing kayak in an easy to grip carry handle. Included in this kit is the assembled Fat Grip Stern Handle and stainless steel hardware. Made in the USA.
$29.99

SS Series Rudder Kit Featuring the YakAttack SwingBlade

The rudder kit for the SS Series of Bonafide Kayaks (SS107 and SS127) features the new YakAttack SwingBlade Rudder and includes every component and part needed for adding a rudder to your Bonafide Kayak.

Designed to be quiet and ergonomic, this rudder kit adds even more fishability to your SS107 or SS127. It utilizes the stock Double Acting™ Foot Braces featured on the Bonafide SS Series and offers hands-free steering capabilities, as well as to help with tracking. The SteeringReel provides added on-the-fly adjustability for going from the low to high seat position. Designed to be ergonomic, the retractable lift/lower handles install on either side of the seat, allowing you to quickly deploy or stow your rudder. The super wide blade provides added surface area to make the rudder incredibly responsive, while the vents above the waterline reduce wind drag.

Each of the components are 100% custom designed and made to maximize the performance of your SS07 or SS127.

Features:
Increases paddling efficiency and performance.
Adjustable tension at the foot braces "on the fly".
Low drag pulley for smooth deployment.
Rubber bumpers to reduce noise during deployment.
Tight turning radius for maximum performance.
Rudder lock with hook tether to aid in transport.
Includes all necessary components.
Made in the USA.
$169.99

SS Side Handle Accessory Package

On the SS107 and SS127 fishing kayaks, we were able to take a rather simple feature like a side handle and add some extra benefits and features to help with organization and increase the utility to help with rod, paddle, stakeout pole storage to help make your time on the water a little easier. One thing you will notice is the smooth and wide underside of the handle. In doing so it is more comfortable in the hand eliminating pressure points and discomfort from other commonly used handles in the industry. Every component seen on our kayaks were custom designed by us and are manufactured in the USA with the specific use to make our kayaks the best of the best and to give you the ultimate kayak fishing experience. This kit includes a pair of replacement side handles and four ¼”-20 stainless screws. Made in the USA.
$7.99

SS Steering Kit

This steering kit utilizes the stock Double Acting™ Foot Braces featured on the Bonafide SS Series and offers hands free steering capabilities. When going from the low position to the high position, it's easy to adjust your foot braces with the SteeringReels. Included are two sections of Sprectra cord, tubing, and a left/right SteeringReel assembly. This kit is commonly used on the SS Series Bonafide's in conjunction with DIY motor installs or third party rudder kits. Each of the components are 100% custom designed and made to maximize the performance of your Bonafide.
$59.99

SS107 Boss Strap Accessory Package

The Boss Strap on the SS107 helps manage a few pain points of kayak fishing making your time on the water more efficient and more organized while keeping noise at a minimum. Featuring raised bosses on the underside and top side of the full rubber strap, the top side is great for aiding in staging and keeping your rod tips separated and ready to cast. The bosses on the underside of the strap help provide friction when storing the blade of your paddle keeping everything secure and quiet yet easily within reach. Included in this kit are four black nylon washers and four stainless steel screws. Made in the USA.
$9.99

SS107 Bow Hatch Accessory Package

The bow hatch on the SS107 was specifically designed for maximum organization and storage on your Bonafide fishing kayak. The raised grooves aid in rod management and allow you to stage several rods rigged and at the ready to cast at a moment’s notice. Made from ABS the hatch is light weight and built for a lifetime of use.

Featuring Bonafide’s propriety custom designed Doubleheader™ Hinges the oversized bow hatch is capable of opening either towards the bow of the kayak while you are on the water allowing for easy access or towards the stern making in-hull storage of rods, paddles, and stakeout poles extreme easy when transporting your gear after a long day on the water. Included with this kit are one thermoformed bow hatch, four hinge upper mounts, and the cord attachment. Made in the USA.
$49.99

SS107 Deck Traction Pads-Grey Accessory Package

The grey deck traction with black outline is featured stock on the True Grit Sand, Hondo Orange, and Top Gun Grey colorways of the SS107 fishing kayak. Our traction pads are made from a UV resistant closed cell PE/EVA foam that is made to last. The deck traction aids in comfort and also helps limit noise when moving around or if items and lures are dropped on the deck of your kayak. An advantage of kayak fishing is the stealthy nature and the having high quality deck traction that comes stock on the SS series of kayaks is just one features that makes up Ultimate Fishability.

For those of you who aren’t feeling the orange trim on your Cool Hand Blue SS107, this kit allows you to tone it down and add a color neutral touch to personalize your kayak. Included with this package is a full deck traction kit for your SS107.
$114.99

Universal Scupper Plugs S/M

This soft rubber scupper plug is designed to fit circular scuppers in your sit-on-top kayak. The conical shape and hollow design allow for the rubber construction to accommodate scupper holes ranging from 1.13” to 1.40” in diameter. The rigid center core gives you a nice place to push the plug in place and the pull tab makes for easy removal.

Sold in a 2 pack
Size - small / medium
Fits scupper holes ranging from 1.13” to 1.40” diameter
$11.95

Welding Rods - Pack of 6

Pack of 6 welding rods
$9.99

YakAttack 10Ah Battery Power Kit

The YakAttack Pro Power Battery Kit is a water-resistant lithium-ion rechargeable battery pack that can be used to power your fish finder, LED lights, and more! This 12 volt rechargeable battery pack has a 10Ah capacity with open-ended connectors that can charge and power a variety of electronic devices. Durable, lightweight, and compact, this system is perfect for your next adventure.

For 2020, there were a number of updates to make it more durable, corrosion-resistant in saltwater applications, and easier to use. We added a gold plated coating to all of our connector pins to help reduce the build-up of corrosion in saltwater applications. Additionally, we shortened the DC cable length from 22" to 12" as the extra length wasn't needed and the shorter wire makes it more convenient. Finally, the Nocqua team developed a completely new charger for 2020, and we’re excited to share the details with you.

a) Reverse polarity protection. Combined with the alignment arrows, we added a layer of protection to the charger to indicate improper connection issues, while protecting the charger from potential damage.

b) Dual circuit board protection. The new circuit board protects against overcharging and monitoring how energy is transferred to each cell or to indicate if there's an issue.

c) The battery charge indicator offers a visual reference for charging status. 25% / 50% / 75% / 100%. The other great benefit is using the charger to test a battery level before use. Bonus feature! Connect the charger to the battery to display the current charge level, so you will always know where your battery charge is at prior to use.

 

  • Powered by Nocqua Adventure Gear
  • Dimensions: 3.75" x 3.50" x 3"  
  • Battery weighs 1.4 lbs
  • Includes complete 10 Ah lithium-ion battery kit
  • Water-resistant and rechargeable
  • Six-month warranty
  • Made in China
  • SKU: PPK-10A
$129.99

YakAttack 90 Degree MightyMount Adapter

The 90 Degree MightyMount Adapter is more than meets the eye. Compatible with the LockNLoad Mounting System and all of the components this piece heightens the versatility of the LockNLoad system as a whole. First of all, it can be used to add an additional pivot angle for products such as rod holders and fish finder mounts that use the LockNLoad system. Secondly, when combined with MightyBolt products like the VISICarbon Pro you are able to utilize the easy on and off functionality of the LockNLoad system. Finally, when paired with the RotoGrip Paddle Holder and a complete LockNLoad base you are able to increase the overall height of the RotoGrip allowing for use with kayaks where the bow hatch is higher than the GearTrac on the gunwales such as the Bonafide SS, Wilderness Systems ATAK, and Jackson Coosa HD.

There are many ways to utilize this new mount. How will you make it yours?

 

  • For use with the LockNLoad mounting system
  • Compatible with YakAttack rod holders, fish finder mounts, and camera mounts
  • Gives added articulation point
  • Includes 90 degree mounts, bolt, spring, and knob
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: LNL-1007
$9.95

YakAttack AR Tube Rod Holder with Track Mounted LockNLoad Mounting System

The YakAttack Advanced Rod Tube™ is our take on the classic tube-style rod holder designed for spinning and casting rods and reels. It features a gimbal lock that flips into place to accommodate longer rods as well as multiple attachment points on the bottom side for rod leashes, increasing gear security. Made from marine grade polymers the AR Tube is built to last and comes with our Built for Life Guarantee. The AR Rod Tube is track-mount ready, and features the LockNLoad™ Mounting System. The LockNLoad system offers unrivaled track-mount security, but its also incredibly easy to adjust. GearTrac not included

There are 3 modes: locked, adjustment, and removal.

- From locked mode, simply squeeze a lever to go into adjustment mode.

- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.

- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.

$41.95

YakAttack Cam Straps 12 Feet 2 Pack

The YakAttack Cam Straps are an essential for any kayak angler. The high-quality polyester webbing has a higher break strength, superior resistance to abrasion, less stretch, better UV resistance, and increased water resistance compared to common polypropylene straps sold by most companies. The custom rubber buckle cover helps prevent dents and scratches while car topping.

  • Sold in a 2 pack
  • 12 ft. long
  • 1 inch wide webbing
  • Made with high-quality polyester webbing
  • Custom rubber buckle cover
  • Buckle and webbing are made in China
  • Buckle cover and sewing are done in the USA
  • SKU: YEP-1006-12
$22.95

YakAttack CatchNRelease Drip Rings

YakAttack CatchNRelease Drip Ring - Pair (YEP-1001)

This deep dish CatchNRelease Drip Ring features a unique design which catches water coming off the paddle blade in the high position, and releases it back into the water during your downstroke. We think this is the driest drip ring on the market. Soft and supple, the CatchNRelease Drip Ring is designed to fit all common sized paddle shafts including Werner, Bending Branches, and other popular brands of kayak paddles.

  • Sold in a two pack
  • Fits standard diameter kayak paddles
  • Made in the USA
  • SKU: YEP-1001
$9.95

YakAttack CellBlok

Depthfinder installation on kayaks just got smarter. The YakAttack CellBlok is a track mounted battery box and its top surface serves as a mounting platform for the display and transducer deployment arm. No more drilling holes in your kayak or routing wires! Simply loosen the two track mount knobs and the CellBlok allows you to quickly and easily attach or remove your depthfinder. A minimum of 10.5" of track is required to attach the CellBlok. The YakAttack SwitchBlade Transducer Deployment Arm and our line of fish finder mounts pair perfectly with the CellBlok to create a complete fish finder mounting solution.

Interior Space - 6.375'' x 4.25'' x 2.60''

Exterior Dimensions - 10.25'' x 6.75'' x 3.50''

CellBlok box only with hardware to attach to GearTrac.
$64.95

YakAttack Complete LockNLoad Track Base

YakAttack’s LockNLoad™ mounting system, is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad™ track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt™, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).

  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: LNL-1001
$19.95

YakAttack DoubleHeader Track Mount

In typical YakAttack fashion, they started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The end result of the DoubleHeader Track Mount was a unique addition to the YakAttack product line that allows the ability to attach various accessories using a single attachment point. If you already own two RotoGrip Paddle Holders, then simply remove the rubber washer included with your paddle holders, insert the MightyBolt through the underside of the DoubleHeader, and tighten the body of the RotoGrip. The DoubleHeader in that configuration provides the perfect offset paddle holder solution moving your paddle off the side of your kayak, freeing up track space. Let’s say you want to add dual Omega Rod Holders for crappie fishing. The mounting holes at the end of the DoubleHeader are LockNLoad compatible and allow for easy attachment of LockNLoad accessories like the Omega or Omega Pro. Looking to maximize the number of rods on your kayak for tournament day? The DoubleHeader Track Mount serves as the perfect mounting system for dual AR Tube Rod Holders.  

If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob and MightyBolt from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory-installed kayak track.

Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.

The DoubleHeader Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.

  • Made in the USA
  • Built for Life Guarantee
  • Single point of attachment
  • LockNLoad Compatible
  • Includes two sizes of Track Disks
  • DoubleHeader is 8.25” wide
  • The DoubleHeader Track Mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
$19.95

YakAttack DoubleHeader w/ Dual RotoGrips

In typical YakAttack fashion, they started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The DoubleHeader track mount can serve several different purposes, but in this case, it is the foundation for the perfect offset paddle holder solution that our customers have been dreaming of ever since the launch of the RotoGrip several years back. Compatible with standard diameter kayak paddles the RotoGrip Paddle Holder has become the most widely used paddle holder in the industry. The RotoGrip is a simple yet highly effective paddle holder solution, but many paddlers wanted to use one or two RotoGrips on a single side of the kayak. When using two RotoGrips on a single piece of track, you get a nice tight hold, but you also cover up the entire length of the track with your paddle, rendering open track space useless. The DoubleHeader in this configuration eliminates that problem entirely and offsets the paddle holders off the kayak allowing for the full functionality of the remaining track space for other accessories. If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.

Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.

For added paddle security, included with the DoubleHeader and RotoGrip’s are two SnapNStrap Security Tethers. To secure your paddle unhook the bungee tab from the stored position on the base of the DoubleHeader, wrap it around the shaft of your paddle, and loop it over the tab on the outward side of the RotoGrip. This feature will come in handy for kayakers using pedal drive kayaks like a Hobie or motors like a Torqeedo or MotorGuide. In those situations, a paddle might not be needed all the time, so the security tethers provide extra peace of mind knowing your paddle is safe and sound. If you need quick access to your paddle at a moment's notice, the tethers have a stored position, so they do not get in the way when inserting or removing your paddle from the dual RotoGrips.

The DoubleHeader with Dual RotoGrip Paddle Holders is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.      

  • Made in the USA
  • Built for Life Guarantee
  • Single point of attachment
  • LockNLoad Compatible
  • Includes two RotoGrip Paddle Holders
  • Includes two SnapNStrap Security Tethers
  • Includes two sizes of Track Disks
  • Perfect for anglers with pedal kayaks or motors
  • Compatible with standard diameter kayak paddles
  • DoubleHeader is 8.25” wide
  • The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
$39.95

YakAttack GearTrac Hardware Kit

Includes four of each: Convertible Knobs, 1-1/2'' MightyBolts, Track Nuts, 1-1/4'' Socket Head Cap Screws. All standard 1/4-20 thread. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
  • 4 Stainless Steel MightyBolts
  • 4 Convertible Knobs
  • 4 Track Nuts
  • 4 Socket Head Cap Screws
  • All Standard 1/4-20 Thread
  • Patent Pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: HRC-1004
$24.95

YakAttack GT Cleat XL

The larger and heavier-duty version to our original GT Cleat, the GT Cleat XL™ is our simple and highly effective answer to the issue of line management. It attaches to all YakAttack® GearTrac™, MightyMount XL tracks, and most other kayak track systems. The GT Cleat XL makes for a perfect companion to our highly popular LeverLoc™ Anchor Trolley and is a low profile, easy to attach and adjust anchor line cleat. The underside of the cleat features two tabs and a rubber washer helping keep the cleat from rotating and sliding in the track from anchor line tension.  Best used with 1/2" rope.

  • Compatible with YakAttack GearTrac, MightyMount, and most other factory-installed kayak track systems
  • Best used with 1/2" rope
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: MTA-1004
$19.95

YakAttack HD Mount LockNLoad

YakAttack’s LockNLoad™ mounting system is exactly what you would expect from the leader in track mounting technology. Now, enjoy the versatility and ingenuity of the LockNLoad System in heavy duty applications such as trolling for big game. Due to the two MightyBolt attachment points, the HD Track Mount gives you more gear security than ever before! No track? No problem! You can easily remove the two MightyBolts and use hardware to quickly deck mount your YakAttack rod holder or fish finder, as well as using holes from old-school deck mounts to mount the HD Track Mount crossways. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

 

  • Two MightyBolt attachment points gives you better gear security
  • Not for use with under 8" of track
  • For Heavy Duty applications
  • Can be used for deck mounting
  • Utilizes pre-drilled holes from old-school deck mounts to be mounted crossways
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: LNL-1006
$19.95

YakAttack Horizontal Tie Downs

This track mounted tie-down allows a quick and easy attachment point for webbing, small ropes, and bungee in configurations in which the Vertical Tie Down is not ideal. Perfect for securing Blackpaks™, other crate systems, and large gear bags in a kayak tankwell. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

  • Sold in 2 pack
  • Attaches to YakAttack® GearTrac™, MightyMounts, and most other factory installed kayak track
  • Use with 1"-1.5" webbing straps or bungee
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: AAP-1027

$19.95

YakAttack LeverLoc Anchor Trolley

The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord with a highly reflective tracer. Features YakAttack Stealth Pulleys for super smooth operation.

 

  • Easy installation
  • New YakAttack Stealth Pulleys
  • 35' of highly reflective USA-made 550 paracord
  • Includes all necessary hardware for installation
  • Made in the USA
  • Covered by our Built for Life Guarantee 
  • SKU: AMS-1003
$36.95

YakAttack LeverLoc Anchor Trolley HD

The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord with a highly reflective tracer. This model features the HD option, which gets you two extra PadHooks plus backing plates for the pulleys and LeverLoc™, enabling a heavy duty install when compared to the self-threading screws included in the standard kit. Features YakAttack Stealth Pulleys for super smooth operation. The use of a YakAttack Rigging Bullet, RB1032, is highly recommend for installs where the install location is out of arms reach.

  • Easy installation
  • New YakAttack Stealth Pulleys
  • 35' of highly reflective USA-made 550 paracord
  • Includes all necessary hardware for installation
  • Heavy duty
  • Includes backing plates and extra Padhooks not included in AMS-1003.
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: AMS-1004
$44.95

YakAttack LNL Extension

This 4" or 8” extension arm allows you to increase the height and adjustability of your YakAttack accessory that features the LockNLoad™ mounting system like rod holders, fish finder mounts, and more. Includes all necessary hardware.

 

  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: LNL-1003
$14.95

YakAttack Lowrance Hook2 Fish Finder Mount with Track Mounted LockNLoad Mounting

Designed to replace the factory base on Lowrance Hook2 4 and 5, Reveal 5, and Simrad Cruise 5. This Lowrance Fishfinder Mount is a simple, clean, and a highly effective solution. This mount improves on the original included mount enabling fast and easy one-handed display adjustment. Includes the LockNLoad Mounting System for maximum versatility and rigidity. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).

  • GearTrac not included
  • Fishfinder not included
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • Patent Pending
  • SKU: FFP-1006
$49.95

YakAttack MightyBolt - 6 pack - 2"

Six stainless steel Yakattack MightyBolts™ with 1/2" Wide Head. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
 
  • Six stainless steel MightyBolts™
  • 1", 1.5'', or 2" Long Stud
  • 1/2" Wide Head
  • 1/4-20 Threading
  • Patent Pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: MB15-12-6
$14.95

YakAttack MightyMount II with FullBack plate

The MightyMount II is a low profile, highly versatile mount with a small footprint and the same hole pattern as the original MightyMount. Used for attaching accessories requiring a single t-bolt attachment point or YakAttack products that feature the LockNLoad™ mounting system like rod holders, fish finders, and more.

Mighty Mount II is 2"x2.375"x.5"
Contains all necessary hardware
$16.95

YakAttack MultiMount Cup Holder

YAKATTACK MULTIMOUNT CUP HOLDER

The YakAttack MultiMount Cup Holder quickly and easily attaches to YakAttack GearTrac, MightyMount, Native Watercraft gear track, Bonafide Kayaks Gear Track and most other kayak track systems.


Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene Bottles to 12 oz cans and water bottles.
The MultiMount Cup Holder also makes a great place to put small tools and other items. Made from premium materials for a lifetime of use in even the harshest environments.
Keep your beverage at reach while kayak fishing with the MultiMount Cup Holder!

KEY FEATURES

  • Fits various different size beverage containers
  • Large enough to store a can with a koozie
  • GearTrac and MightyMount ready without any additional components
  • Bottle not included
$19.95

YakAttack Omega Pro Rod Holder

The YakAttack Omega Pro series rod holders are the last rod holder you’ll ever need. 

The Omega Pro adds an extension arm to help get your reel higher off the water or helps accommodate longer rod butts.

The Omega Pro Rod Holder is a truly universal solution that works flawlessly with spinning, casting, larger conventional reels, and yes – even fly rods of all sizes. A 360 degree rotating collar offers the ability to quickly secure the rod by capturing the reel, and allows spinning reels to be stowed in the natural downward position, not hung off the side. Multiple modes allow anglers to easily stage rods for quick access or lock them in for maximum security. 

The Omega Pro Rod Holder attaches to your kayak, boat, or other watercraft with YakAttack’s LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. 

Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. 

Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. 

There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: 
- From locked mode, simply squeeze a lever to go into adjustment mode. 
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode. 
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount. 

  • Gear Trac not included
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • Patent Pending
$39.95

YakAttack Omega Rod Holder with Track Mounted LockNLoad Mounting System

The Omega Rod Holder attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.

There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:

  • From locked mode, simply squeeze a lever to go into adjustment mode.
  •  In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
  • To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
$31.95

YakAttack Padhook Kit - 6 pack

The PadHook, a simple but clever design by YakAttack that combines the functionality of both a pad-eye and a hook can be used in applications ranging from anchor trolleys, deck rigging, and other installs where bungee, rope, or other cordage are used. When used with the YakAttack LeverLoc Anchor Trolley or other anchor trolley systems the PadHook is a great tool for guiding the trolley lines and keep even the tightest trolley lines in place on the side of the kayak, not over your gunwale.

 

  • Six PadHooks
  • Stainless steel hardware included.
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: AMS-1007
$11.95

YakAttack PanFish Portrait Pro Camera Mount

The LockNLoad™ track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.

The ultra-durable construction of the PanFish Portrait Pro™ is not only super lightweight - it's also incredibly rigid, reducing shake in your camera footage.

Utilizes the LockNLoad™ Track Mount System for easy on and off, angled articulation, and rotational pivoting
Durable, lightweight, and super rigid construction
Features the new YakAttack Camera Ball
For use with camera utilizing a 1/4-20 mount or GoPro Cameras
11.5" Tall
$59.95

YakAttack PanFish Pro Camera Mount

The LockNLoad™ track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.



The ultra-durable aluminum construction of the PanFish Pro™ is not only super lightweight - it's also incredibly rigid, reducing shake in your camera footage.In addition, the patented design allows for one-hand rotation without loosening or tightening the product, giving you the ability to get the smoothest pan shot.

Utilizes the LockNLoad™ Track Mount System for easy on and off, angled articulation, and rotational pivoting
Durable, lightweight, and super rigid aluminum construction
Features the new YakAttack Camera Ball
It floats!
For use with camera utilizing a 1/4-20 mount or GoPro Cameras
33" Tall
$99.95

YakAttack ParkNPole 7'8"

The YakAttack ParkNPole 7'8" is the updated version of our ParkNPole 8' that better complies with UPS shipping restrictions.
 
Used as a stakeout/push pole for kayaking, this product has many great features including a floating base, a fiberglass body, and a foot and tip that are UV stable and made of wear-resistant nylon. Lightweight and incredibly durable, this product makes the perfect companion for fishing in shallow waters.
  • Foot for paddling
  • Tip for staking into the ground
  • 7' 8" long
  • .845'' Diameter Tubing
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: PNP78
$99.95

YakAttack ParkNPole Link 8'

The ParkNPole Link™ is a smarter, two-piece version of the popular 8' ParkNPole™. The two-piece construction makes transportation easy to and from the water or makes it possible to store inside the hull of your fishing kayak. For a longer option purchase the 46'' extension making the total length 12'. At 12 feet, the ParkNPole Link™ plus the extension, make for a great push pole and also helps when anchoring in deeper water. Made from specially formed fiberglass and UV stabilized, wear resistant nylon. At 1.8 lbs, it is incredibly lightweight and extremely durable.

  • 8' long
  • .845'' Diameter Tubing 
  • Purchase the 46" extension for an extended length of 12'
  • Wear-resistant nylon tip and foot with a fiberglass body
  • Weights only 1.8 lbs, yet is extremely durable.
  • The two-piece construction allows for easy transportation and storage.
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: PNPL-8
$129.95

YakAttack ParkNPole RotoGrip

Since launching the YakAttack ParkNPole a number of years ago customers have been requesting a track mounted solution to secure their stakeout pole. This product is compatible with every length of YakAttack ParkNPole including the 6', 7' 8", and 8' Link. Using our popular RotoGrip platform, larger wheels were designed to perfectly secure the 0.84” ParkNPole diameter tubing. Super low profile at 2.4" tall, the ParkNPole RotoGrip secures the shaft between two soft rollers, securing your stakeout pole quietly and with just the right amount of tension. Sold as a single pack.

To secure your ParkNPole off the side of your kayak, the ParkNPole RotoGrip pairs nicely with a set of SideArm Track Mounts or the DoubleHeader Track Mount. Compatible with YakAttack MightyMount’s, GearTrac, and most other factory installed kayak track systems and aftermarket track from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

  • Utilizes the Mighty Bolt to attach to kayak track
  • 2.4" tall
  • GearTrac not included
  • Single pack
  • Patent Pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: GRP-1004
$16.95

YakAttack Rectangular Fish Finder Mount with Track Mounted LockNLoad Mounting System

No more ball mounts, no more slipping or rotating in the track. With the LockNLoad™ mounting system, this is the cleanest and most secure mounting solution for larger Lowrance, Garmin, and Raymarine units featuring a gimbal mount such as the Lowrance Hook2 7, Garmin Striker 9sv, and the Raymarine Axion 7. Features the LockNLoad mounting system offering ultra secure attachment.
$49.95

YakAttack RotoGrip Paddle Holder

Voted Product of the Year for Yak Angler's Kayak Anglers Choice Awards for 2016. 

The YakAttack RotoGrip™ Paddle Holder sheds a new light on the age old problem of paddle management. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Kayak and SUP anglers have lots of options for installing and configuring this handy little gadget. Super low profile at 2.25" tall, the RotoGrip™ Paddle Holder grips the paddle shaft between two soft rollers, securing your paddle quietly and with just the right amount of tension. Sold in single packs.

  • Utilizes the Mighty Bolt to attach to kayak track
  • 2.25" tall
  • GearTrac not included
  • Single pack
  • Patent Pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: GRP-1001

$16.95

YakAttack Rotogrip SnapNStrap 2 Pack

The SnapNStrap Security Tether was specifically designed for the YakAttack RotoGrip Paddle Holder; RotoGrip not included. It acts as a simple hook and loop system using bungee to add extra security and peace of mind knowing your paddle is safe and secure. To attach the SnapNStrap system, simply remove the rubber washer and MightyBolt from your RotoGrip and slide on the molded frame with the two tabs facing upwards. Apply a little pressure, and the system will snap in place. From there, reassemble the washer and MightyBolt. To secure your paddle, wrap the bungee and pull tab over the shaft of your paddle and loop it over the tab of the SnapNStrap frame.

  • RotoGrip not included
  • Tool-less attachment
  • Compatible with the RotoGrip Paddle Holder
  • Sold as a 2 pack
  • Made in the USA
  • Lifetime Warranty
$7.95

YakAttack Round Base Fish Finder Mount with Track Mounted LockNLoad Mounting System

No more ball mounts, no more slipping or rotating in the track. With the LockNLoad™ mounting system this is the cleanest and most secure mounting solution for Garmin and Raymarine units featuring a 3 hole pattern round base such as the Garmin Striker 4 and the Raymarine Dragonfly 7 Pro. Features the LockNLoad mounting system offering ultra secure attachment.
$49.95

YakAttack SideArm Track Mount

The YakAttack SideArm Track Mount was born out of using existing products to solve a rigging problem. Instead of using a standard 4” Extension Arm with a longer MightyBolt to offset a RotoGrip Paddle Holder, we created an off-the-shelf solution that accomplishes the task and then some. Any YakAttack track-mounted product that uses a single MightyBolt is compatible with the MightyMount at the end of the SideArm. You can also replace the knob of the SideArm with a LockNLoad accessory like a YakAttack Omega Rod Holder or PanFish Portrait Camera Mount. This feature provides the opportunity to mount two accessories from a single point. The RotoGrip Paddle Holder and ParkNPole RotoGrip are two commonly used accessories with the SideArm Track Mount.

Included with the SideArm Track Mount are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system was included with your kayak, try both of them and determine which one will provide the best fit. Only one Track Disk is needed on the underside of the SideArm for the mount to work as designed. In addition, the Track Disks allow for the SideArm to be mounted in any direction in relation to the track or MightyMount it is attached to. For example, you can set up the SideArm directly off the side of your kayak for a paddle holder solution or having it facing inwards and virtually 360º anywhere in between.

Compatible with YakAttack MightyMount’s, GearTrac, and most other factory installed kayak track systems and aftermarket track from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

The SideArm Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.

  • Made in the USA
  • Built for Life Guarantee
  • Single point of attachment
  • LockNLoad Compatible
  • Includes two sizes of Track Disks
  • The SideArm Track Mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
  • SKU: TMA-1003
$19.95

YakAttack SideWinder Anchor Line Reel, Includes Track Hardware and 75 Feet of 550 Paracord

Get your anchor line under control with the YakAttack SideWinder! Designed to make anchor line management simple and effective, the YakAttack SideWinder has some great features packed into a simple and effective design. The line lock groove keeps just the right amount of line deployed, and the tail rope passage means it can be deployed outside your kayak anchor trolley ring for true quick release in dangerous situations. For flat water with no current, use the track mount holes in conjunction with the included Mighty Bolts and knobs to attach the SideWinder directly to your kayak's track system..

Includes hardware for install onto your kayak's track system
Includes 75 feet of 550 paracord
14"x6.38"x0.75"
Geartrac not included
$34.95

YakAttack Snagless Slotted Padeye - 6 pack

The commonly used padeye design is a thing of the past and was never truly intended to be used on a kayak in the first place. Our Snagless Slotted Padeyes were designed from the ground up with paddle sports and kayak fishing in the forefront of our design process. The low profile, contoured design of the Snagless Slotted Padeye looks great and has no snag points. The slotted design accommodates popular padeye hole patterns of 1-3/8" and 1-1/16". Unlike the original padeye which sits very high and is prone to break the low profile geometry and material makes for a more kayak friendly design. Easily attaches with the included stainless self-threading screws.

 

  • Sold in a 6 pack
  • Includes #10 stainless steel self-threading screws 
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: YEP-1002
$11.95

YakAttack Surface Mount Retractor

Secure your gear without bulky leashes or floats using the YakAttack Surface Mount Retractor. This super versatile unit combines the innovation you've come to expect from YakAttack and genuine T-Reign retracting mechanism, 36" Kevlar cord, and a removable 4" tether. Designed for surface mounting, this kit comes complete with blunt end thread forming screws for threading directly into rotomolded and thermoformed kayaks.
  • Made from UV Resistant High Density Polyethylene
  • 36" Kevlar Cord
  • Removable 4" tether
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: RET-1001
$29.95

YakAttack Tie-Down Eyelets 2 pack

These tie-downs come with a Mighty Bolt base. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Perfect as an anchoring point to secure a cooler or other accessory, as well as being a great adjustment point for directing steering cables on the deck of your kayak. Sold in a two-pack.
  • Patent Pending
  • 2 Pack
  • Made of stainless steel
  • Compatible with GearTrac, MightyMounts, and most other factory-installed track systems
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: AAP-1016
$16.95

YakAttack Track Mounted Retractor

Secure your kayak fishing gear without bulky leashes or floats using the YakAttack Track Mount Retractor. This super versatile unit combines the innovation you've come to expect from YakAttack and genuine T-Reign retracting mechanism, 36" Kevlar cord, and a removable 4" tether. Designed for track mounting, this kit comes complete with everything you need.
GearTrac not included.


  • UV Resistant High Density Polyethylene
  • 36" Kevlar Cord
  • Removable 4" tether
$34.95

YakAttack Universal Mounting Plate

This product is a DIY mount and you will be required to drill holes to mount something like a Humminbird PiranhaMAX 4 to the mounting plate. Since every install will most likely be different no extra screws, nuts, or washers are included, and it is up to the user to find their own hardware for this install.

Mounting plate is 6" x 3.5"
$49.95

YakAttack Vertical Tie Downs Track Mount 2 pack

The YakAttack Track Mount Vertical Tie Downs come with a Mighty Bolt base. erfect as an anchoring point to secure a cooler or any other accessory to the track. Designed to work with 1'' and 1.5'' flat webbing and can also be used with bungee. Made in the USA from premium materials for a lifetime of use in even the harshest environments. Sold in a 2 pack.
$19.95

YakAttack VISICarbon Pro, MightyMount and GearTrac ready

Designed to meet the needs of all anglers- from serious kayak fishermen to recreational paddlers- the VISICarbon Pro™exhibits unprecedented performance in light weight, low drag, and portability- all with plenty of style. The ultra-thin mast and instantly recognizable flag combine to offer excellent performance with low wind resistance, and enhances your visibility on the water, night and day. The VISICarbon Pro™ light is complete with an LED module, which will burn for 100 hours on 3 AA batteries (included) and provides 360° visibility. The Silent Snap flag attachment provides a secure fastening that can be left for hours, or removed in seconds. The collapsed unit fits inside the flag for easy organization, creating a convenient and portable storage solution at only 14" long. The deployed VISICarbon Pro™ is 48" long. The SilentSlip foam at the base of the unit floats, but still fits into most flush mount and tubular rod holders. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems.

Enhances your visibility day or night.
SilentSlip foam fits most flush mount and tubular rod holders.
48" long deployed, 14" collapsed.
Collapsed unit stores inside flag.
It floats!
Designed with carbon fiber tubing for stiffness and ultra light weight.
Silent Snap flag attachment system provides quick and easy flag installation and removal.
LEDs burn 100 hours on 3 AA batteries (included).
10,000+ hours lamp life.
$94.95

YakAttack Zooka II Rod Holder with Track Mounted LockNLoad Mounting System

The Zooka II attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.

There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:

- From locked mode, simply squeeze a lever to go into adjustment mode.

- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.

- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
$41.95

Follow us on social media!